Brewtools | F300 Unitank | 32-76 Gallon Capacity | 120-290L

• Ferment, cold crash, and carbonate beer all in one vessel with the Brewtools F-Series Unitank
• Cooling jacket welded to the vertical walls of the tank provide superior cooling capabilities compared to in-solution cooling coils
• Made from stainless steel throughout with Brewtools' proprietary PureBlast™ surface—no passivation required, simply rinse with warm water before your first use
• Pressure rated to 30 PSI so you can safely ferment under pressure and pressure transfer finished beer to kegs with virtually no oxygen pickup
• Brewtools is a Norwegian brand known for high-quality products made without compromise. From brewing systems to fermenters, they continue to push the envelope of innovation for homebrewers around the globe
• All valves, fittings, and gaskets come included

Brewtools Unitanks are fermenters made for ambitious homebrewers and small breweries. As part of the Brewtools identity, they've explored new techniques and solutions. This has resulted in a series of high end fermentation tanks with new features and a lot of possibilities.

Key Features:

• Brewtools PureBlast™ surface inside and out which eliminate the use of wax and polishing compounds and does not require passivation.
• Cooling jacket in the vertical walls offers efficient cooling without the hassle of cleaning a spiral.
• Many options for connecting accessories like sensors, heaters, carb. stones and other accessories.
• Pressure rated for 2 bar / 30 PSI
• Cooling jacket pressure rated for 0.5 bar / 7 PSI
• 8" TC port on top for easy access.
• 2" TC dump and racking valves.

BrewTools Unitanks are designed and manufactured with special attention to safety and quality. They are tested and certified according to the requirements for PED 2014/68/EU by a third party.

Specifications:

• Low height w/o acc.: 66.1"
• Max height w/o acc.: 74"
• Packaging size: 70.8" (h) x 28.3" (w) x 28.3" (d)
• Net weight: 167.1 lbs
• Gross weight: 209.4 lbs
• Tank diameter (inside): Ø23.6"
• Gross volume: 81.8 gal
• Max rec. volume: 76.6 gal
• Min rec. volume: 31.7 gal
• Volume, cone: 10.5 gal
• Material: 1.5mm stainless steel (SS304)
• Operating pressure: 1.0 bar / 15 PSI
• Max pressure: 2.0 bar / 30 PSI

In the box:

• Unitank with adjustable frame
• 1 pcs Analog pressure gauge, TC34mm
• 2 pcs Butterfly-valve, 2"
• 1 pcs Butterfly-valve, 34mm DN20
• 1 pcs Blow-off pipe
• 1 pcs Racking arm 2"
• 1 pcs TC elbow 90°, 2"
• 1 pcs Insulation jacket, black neoprene
• 1 pcs Sample valve, 34mm
• 1 pcs TC Adapter 8"-4"
• 1 pcs TC blind cap, 4"
• 1 pcs TC blind cap 2"
• 2 pcs TC blind cap 1.5"
• 3 pcs TC blind cap 34mm
• 2 pcs TC gasket 8" lipped
• 2 pcs TC gasket 4"
• 2 pcs TC gasket 2" 5-pack
• 1 pcs TC gasket 1.5" 5-pack
• 3 pcs TC gasket 34mm 5-pack
• 1 pcs Tri Clamp 8"
• 1 pcs Tri Clamp 4"
• 5 pcs Tri Clamp 2"
• 2 pcs Tri Clamp 1.5"
• 10 pcs Tri Clamp 34mm
• 1 pcs TC tool
• 4 pcs M10 steel/rubber feet
• 1 pcs TC34mm safety valve (PRV, 2 bar)
• Necessary bolts and parts for assembly
• 5 year manufacturer's warranty

Recommended accessories include: HopDrop-kit, Thermowells for your sensors, 34mm Ball-Lock gas adapter for CO2 filling, Coil for sample valve, Spunding valve, Hose barbs for filling and dumping, etc.

For User Manuals and support, please follow this link to Brewtools Docs.

NOTE: Model in photo is a prototype. Minor changes and improvements may occur.